Basic Operation - Subaru WRX-STI Owner's Manual

5-16
Audio/Audio set
NOTE
. This unit does not support commer-
cially available USB hubs.
. Turn on the power of the device
when it is not turned on.
. This device has a USB port for USB
memory/portable device.
. For compatible USB memory de-
vices, refer to "USB memory device"
F5-9.
. For compatible iPod models, refer to
"iPod" F5-9.
. If a USB hub is plugged in, only the
most recently connected USB device
will be recognized.
& Basic operation
This section describes some of the basic
features of the audio/visual system. Some
information may not pertain to your sys-
tem.
Your audio/visual system works when the
ignition switch is turned to the ACC or
ON position.
CAUTION
To prevent the battery from being
discharged, do not leave the audio/
visual system on longer than neces-
sary when the engine is not running.
NOTE
Some functions can also be operated
by using the voice command system.
For details, refer to "Voice command
system" F5-62.
! Turning the system on and off
Press the power/VOLUME knob to turn
the audio/visual system on and off. When
the system turns on, the mode that was in
use the last time the system was turned off
will be displayed. Press and hold the knob
to turn the display to off.
Turn this knob to adjust the volume.
! Selecting an audio source
1. Press the AUDIO/TUNE knob.
2. Select the desired source.