Subaru WRX-STI Owner's Manual page 498

11-60
Maintenance and service/Replacing battery
that has been wrapped in insulating tape
into the gap.
4. Move the flat-head screwdriver in the
order shown in 1. and 2., and remove the
battery, taking care not to damage the
base panel or terminal.
5. Remove the old battery.
6. Fit a new battery (type CR-1620 or
equivalent) in the case with its positive (+)
side facing upward.
7. Put the case together by fitting the
mating part of the button side into the hook
on the key side.
After the battery is replaced, the trans-
mitter must be synchronized with the
remote keyless entry system's control
unit. Press either the " " or "
several times to synchronize the unit.
" button