Subaru WRX-STI Owner's Manual page 284

No. Function
Turn to step up/down frequencies.
&
Press to select an audio source.
9
Refer to Selecting an audio source
F5-16.
& Press to seek for a station/channel.
10
Press and hold for continuous seek.
NOTE
. Although FM is normally static free,
reception can be affected by the sur-
rounding area, atmospheric conditions,
station strength and transmitter dis-
tance. Buildings or other obstructions
may cause momentary static, flutter or
station interference. If reception con-
tinues to be unsatisfactory, switch to a
stronger station.
. The radio automatically changes to
stereo reception when a stereo broad-
cast is received.
! How to change the source
Select the AM or FM key on the source
select screen. Refer to Selecting an audio
source F5-16.
! Presetting a station
The radio mode has a preset function.
In total 18 stations can be set for the FM
band (6 each for FM1, FM2 and FM3) and
12 stations can be set for the AM band (6
each for AM1 and AM2).
When a station name has been acquired,
the station name will be displayed instead
of the frequency.
1. Tune in the desired station.
2. If you touch and hold a key, the system
stores the frequency to the selected
preset channel.
! Radio data system (for Europe and
Australia)
RDS (Radio Data System) is an FM
multiplex broadcasting system, and it
transmits digital information as subcarrier
signals on FM radio. RDS broadcasts
program information and text information,
etc.
The transmitted data of RDS contains the
control data so that the system can
continue to receive the same radio pro-
Audio/Audio set
gram when driving across several loca-
tions.
! Selecting a desired options
screen
1. Select the tab. The Options
screen will be displayed.
Example: Options screen (FM radio for
Europe)
– CONTINUED –
5-27