Locking And Unlocking Doors - Subaru WRX-STI Owner's Manual

. Do not take the transmitter apart.
. Do not get the transmitter wet. If it
gets wet, wipe it dry with a cloth
immediately.
NOTE
. Before leaving the vehicle, make
sure that the doors are locked.
. If any of the doors is open, this
function does not operate.
. For models with "keyless access
with push-button start system", when
the lock button on the access key is
pressed while the access key is placed
too close to the vehicle body, unlock-
ing by the keyless access functions
may not work. In such a case, the
functions will recover by unlocking
using the remote keyless entry system.
& Locking and unlocking doors
NOTE
The setting of the hazard warning
flasher operation can be changed by
your SUBARU dealer. We recommend
that you contact your SUBARU dealer
for details. Also, the setting of the
hazard warning flasher operation can
be changed by operating the multi
function display. For details, refer to
"Hazard warning flasher setting" F3-
85.
Access key
Remote transmitter
1) Lock button
2) Unlock button
Keys and doors/Remote keyless entry system
! Unlocking
Press the unlock button on the access
key/transmitter near the vehicle.
! Models without door unlock
selection function
Models without double locking system:
All doors will be unlocked. Also, the
hazard warning flashers will flash twice.
Models with double locking system:
1. Only the driver s door will be unlocked.
Also, the hazard warning flashers will flash
twice.
2. If you press the unlock button again
within 5 seconds of unlocking the driver s
door, all of the other doors will be
unlocked.
! Models with door unlock selec-
tion function
NOTE
. For security reasons, confirm the
setting is set as "operational" or "non-
operational".
. For models with "keyless access
with push-button start system", the
door unlock selection function can be
set for both the keyless access func-
tion and the remote keyless entry
system. For the method of setting the
2-19
– CONTINUED –