Subaru WRX-STI Owner's Manual page 367

! P (Park)
This position is for parking the vehicle and
starting the engine. In this position, the
transmission is mechanically locked to
prevent the vehicle from rolling freely.
When you park the vehicle, first apply the
parking brake firmly, then shift into the P
position. Do not hold the vehicle with only
the mechanical friction of the transmis-
sion.
To shift the select lever from the P
position to any other position, you should
depress the brake pedal fully then move
the select lever. This prevents the vehicle
from lurching when it is started.
! R (Reverse)
This position is for backing the vehicle. To
shift from the N to R position, stop the
vehicle completely then move the lever to
the R position while pressing the select
lever button in.
When the ignition switch has been turned
to the LOCK / OFF position, movement
of the select lever from the N to R
position is possible for a limited time
period by depressing the brake pedal,
and then it becomes impossible. For
details, refer to Shift lock function F7-23.
Starting and operating/Continuously variable transmission
! N (Neutral)
This position is for restarting a stalled
engine. In this position, the transmission is
neutral, meaning that the wheels and
transmission are not locked. Therefore,
the vehicle will roll freely, even on the
slightest incline unless the parking brake
or foot brake is applied.
Avoid coasting with the transmission in
neutral. Engine braking has no effect in
this condition.
WARNING
Do not drive the vehicle with the
select lever in the "N" (neutral)
position. Engine braking has no
effect in this condition and the risk
of an accident is consequently in-
creased.
NOTE
If the select lever is in the "N" position
when you stop the engine for parking,
you may not subsequently be able to
move it to the "R" and "P" positions. If
this happens, turn the ignition switch to
the "ON" position. You will then be able
to move the select lever to the "P"
position.
! D (Drive)
This position is for normal driving. The
transmission shifts automatically and con-
tinuously into a suitable gear according to
the vehicle speed and the acceleration
you require. Also, while driving up and
down a hill, the transmission assists and
controls the driving performance and
engine braking while corresponding to
the road grade.
When more acceleration is required in the
D position, depress the accelerator
pedal fully to the floor and hold that
position. The transmission will automati-
cally downshift. If the Intelligent (I) mode
or the Sport (S) mode has been selected,
the transmission will operate like a con-
ventional automatic transmission. When
you release the pedal, the transmission
will return to the original gear position.
If one of the shift paddles behind the
steering wheel is operated while driving in
the D position, the transmission will
temporarily switch to the manual mode.
In this mode, you can shift into any gear
position using the shift paddles. For de-
tails about the manual mode, refer to
Selection of manual mode F7-22. Once
the vehicle speed stabilizes, the transmis-
sion will switch from the manual mode
back to the D position for normal driving.
– CONTINUED –
7-21