Table of Contents
Advertisement
4 Specifications
4-2
Connector Specifications
This section provides the Connector Specifications of the Industrial Monitor.
4-2-1
Power Connector Specifications
The power connector is used to supply 24 VDC power to the Industrial Monitor.
The connector can only be inserted the correct way.
The connector is a Phoenix Contact type FKCT 2,5/ 2-STF-5,08 BK (1711707).
1
The pin layout represents the power connector on the Industrial Monitor.
Pin
1
24 VDC
2
0 VDC
Conductor isolation rating
Termination rating
Additional Information
• Refer to 5-3-2 Wire the Power Connector on page 5 - 24 for wiring details.
• Refer to 5-3-1 Ground on page 5 - 17 for grounding details.
• Refer to 5-4 Connect on page 5 - 26 for connection details.
4 - 4
2
Item
Description
Specifications
90°C
90°C
NY-series Industrial Monitor User's Manual (W554)
Advertisement
Table of Contents
