Table of Contents
Advertisement
5 Installation
Ground Connection Details
This section provides details about the ground connection.
Use the ground terminal on the backside of the monitor to ground your Industrial Monitor.
The washers and screw
A
are pre-mounted at the Industrial Monitor.
A
C
B
5
Remove the pre-mounted washers and screw
A
and then mount the ground connection wire
C
to
the Monitor
B
using the washers and screw
A
.
Tighten the screw with a torque of 1.2 N·m max.
Crimp terminals
Use crimp terminals with dimensions X = M4 and Y = 8 mm max.
Y X
Y X
5 - 23
NY-series Industrial Monitor User's Manual (W554)
Advertisement
Table of Contents
