1
Ensure the mounting surface conforms to following requirements.
Standards conformance
IP65
2
Create an opening in the mounting surface.
The table before step 1 gives an overview of the cut out dimensions for the Monitor.
Prepare a rectangular cut out with the dimensions X1 and Y1.
3
Ensure the mounting surface is clean and not warped.
NY-series Industrial Monitor User's Manual (W554)
Material
Steel
Aluminum
5 Installation
Mounting panel requirements
Thickness 1.6 to 6.0 mm
Thickness 2.5 to 6.0 mm
5 - 15
5