When Coated Paper Is Not Properly Aligned
If the size of the coated paper used for printing is B4 , 8
Finisher SR5030 or Booklet Finisher SR5040 might be curled, might stick to other sheets and push it off
the tray, or might not be aligned properly. If this happens, use an auxiliary tray.
There are two types of auxiliary trays. Use the auxiliary tray which corresponds to the weight of the
coated paper.
Using Thin Coated Paper
When the paper weight is 105.0 g/m
1
paper size is B4 , 8
/
2
1.
Press the [Suspend/Resume] key.
2.
Remove the prints.
3.
Pull out the finisher shift tray's extension.
2
, 28 lb. Bond or less (paper thickness: Paper Weight 3), and the
" 14"
or larger, use the auxiliary tray for thin coated paper.
CDN007
CDN011
When Coated Paper Is Not Properly Aligned
1
/
" 14" , or larger, the output paper from
2
1
33