Ricoh PRO C751 Troubleshooting Manual page 24

1. When the Machine Does Not Operate As Wanted
Problem
The print image is not
properly positioned on the
1
paper.
Paper delivered to the high
capacity stacker is curled,
causing it to not align
properly.
Output paper to the stacker
tray does not align properly.
Output paper to the stacker
tray does not align properly.
22
Causes
The machine has not
detected the paper type
and/or width correctly.
Paper is curled.
When using coated paper,
the output paper to the
stacker tray might fail to
align properly.
When the paper weight is
2
280.0 g/m or more, and
the paper size is A3, SRA3
or larger, the output paper
to the stacker tray might fail
to align properly.
Solutions
Contact the machine administrator or
your service representative.
• When the paper is curled
downward, select [Adjust
Curl: Weak] or [Adjust
Strong] under [Adjust Paper Curl]
in Adjustment Settings for
Operators.
• When the paper is curled
upward, select [Adjust
Weak] or [Adjust
under [Adjust Paper Curl] in
Adjustment Settings for
Operators.
For details about the Adjustment
Settings for Operators, see "Adjustment
Settings for Operators", Network and
System Settings Reference
Select [Adjust Curl: Weak] or
[Adjust Curl: Strong] under [Adjust
Paper Curl] in Adjustment Settings for
Operators.
For details about the Adjustment
Settings for Operators, see "Adjustment
Settings for Operators", Network and
System Settings Reference
Select [Adjust Curl: Weak] or
[Adjust Curl: Strong] under [Adjust
Paper Curl] in Adjustment Settings for
Operators.
For details about the Adjustment
Settings for Operators, see "Adjustment
Settings for Operators", Network and
System Settings Reference
Curl:
Curl:
Curl: Strong]
.
.
.