Using Thick Coated Paper - Ricoh PRO C751 Troubleshooting Manual

1. When the Machine Does Not Operate As Wanted
4. Set the auxiliary tray for thin coated paper by aligning the tray with grooves on the end
fence.
1
5. Press the [Suspend/Resume] key to restart the print.
• When the output paper curls downward, it might not align properly, even if the auxiliary tray for
thin coated paper is used. If the paper curls downward, fan the stack of paper and fix the curl
before printing, then turn the paper over and place it back on the Wide LCT. If your machine has a
paper curl correction function, correct the paper curl to make the paper flat or curl upward. For
details about the paper curl correction function, see "Adjustment Settings for Operators", Network
and System Settings Reference
• If the output paper fails to align properly on the auxiliary tray for thin coated paper, use the
auxiliary paper tray. For details about setting the auxiliary paper tray, see p.34 "Using Thick
Coated Paper".
• When removing the output paper, make sure the auxiliary tray for thin coated paper remains in its
set position.

Using Thick Coated Paper

When the paper weight is 105.1 g/m
Paper Weight 7), and the paper size is B4 , 8
34
CDN026
.
2
, 28.1 lb. Bond or more (paper thickness: Paper Weight 4 to
1
/ " 14" or larger, use the auxiliary paper tray.
2