Ricoh PRO C751 Troubleshooting Manual page 37

1. Press the [Suspend/Resume] key.
2. Remove the prints.
3. Pull out the finisher shift tray's extension.
4. Set the auxiliary paper tray.
5. Press the [Suspend/Resume] key to restart the print.
• If the output paper fails to align properly on the auxiliary paper tray, use the auxiliary tray for thin
coated paper. For details about setting the auxiliary tray for thin coated paper, see p.33 "Using
Thin Coated Paper".
When Coated Paper Is Not Properly Aligned
CDN007
CDN011
CDN012
1
35