Removing Jammed Ring Combs - Ricoh PRO C751 Troubleshooting Manual

Hide thumbs Also See for PRO C751:
Table of Contents

Advertisement

Removing Jammed Ring Combs

This section describes how to remove jammed ring combs.
• Keep your hands clear of the inside of the ring binder and the space under the ring binder tray.
You can trap your fingers if you do not.
If ring combs become jammed, a message appears on the display panel. When the message appears,
remove the jammed ring combs.
Open the ring binder
front right cover.
Open the cartridge
cover.
To remove jammed ring combs from the bottom
of the cartridge:
While pressing down the blue buttons
bottom of the cartridge, remove the jammed ring
combs
carefully.
Reinsert the cartridge, push it into place, and then close
the cartridge cover.
Close the ring binder front right cover.
• The ring combs set in the ring comb cartridge might move or become slanted when you remove the
jammed ring combs from the ring comb cartridge. Before replacing the cartridge, check that all the
ring combs are straight and properly aligned.
Lift up and pull out the
Pull out the ring
comb cartridge.
ring comb cartridge.
at the
Removing Jammed Ring Combs
Remove the
jammed ring combs
from the ring binder.
CAL130
2
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents