Chapter 8: Configuring The Bands Initialization File - Avaya CS7000 Administrator's Manual

Chapter 8: Configuring the Bands
The Bands.ini file is a CRS configuration file. The file contains a series of parameters which
manage many aspects of how the CRS Front End operates.
The Bands.ini file is usually located on the C:\WINNT drive of computers running the CRS Front
End application. The Bands.ini file is a local, client-side file. As a System Administrator, you can
configure individual Bands.ini files to optimize functionality for specialized Operators.
Note:
As an aside, the parameters listed in the System Parameters section of the CRS
Note:
Front End are server-side settings. These parameters are entirely separate from
the Bands.ini parameters. If you change the System Parameters section settings
on any client computer, the system implements the new settings on all client
computers. You require System Administrator access to access the System
Parameters section of the CRS Front End. For more information on the System
Parameters section of the CRS Front End, see
Parameters
Figure 76 shows the System Parameters dialog and several Bands.ini files.
Figure 76: System Parameters Dialog and a Number of Bands.ini Files
CRS Front End Parameters
CS7000 System Administrator Guide for Release 9.4
Initialization File
on page 113.
Settings
apply to all
clients
Bands.ini
Chapter 7: Configuring System
Bands.ini
Settings
apply to
individual
Operator
Bands.ini
January 2006
125