Chapter 10: Configuring the Avaya Notifications Subsystem
Customizing Fax Logos
This section describes how to customize fax logos. It consists of the following sections:
Hardware Requirements
●
Fax Templates
●
TIFF Files
●
Customizing Fax Logos
●
Converting to a TIFF Image
●
Converting BMP to TIFF/F using TIFFKIT
●
Applying TIFF/F to Fax Template
●
Hardware Requirements
In order to send faxes, a dialogic VFX40 is required. This card requires a full length PCI slot and
has resource of 4 analogue voice/fax channels. The board is composed of a D41ESC and a
FAX40 daughter board. In later version of this card the fax daughter board has been moved on
to the main board. The Notifications Subsystem application should be configured to use one or
more of these fax channels. The remaining channels may be left for use with the XMS
configuration.
Fax Templates
Fax notifications are built based on a set of supplied templates with the Notifications Subsystem
application. Templates are text based that describe the format of final delivered fax. The
Scheduler loads in the appropriate template and embeds run-time conference data before
dialling the given fax number. Monochrome graphics may also embedded using the IMPORT
keyword in a fax template.
For example:
Template: CONFIRM1AA.TXT
{IMPORT/HeadingLogo.tif}
{BOX/1/1,2}
To:[NAME]
[CMNAME]
190
CS7000 System Administrator Guide for Release 9.4
Scheduled by Inventus
On: [DATE]
At: [TIME]
January 2006