Avaya CS7000 Administrator's Manual page 139

Table 18: Make Reservation Settings (continued)
Parameter
AutoPIN
SubConfSize
CabinetRef
AnyCabinetFlag
CS7000 System Administrator Guide for Release 9.4
Description
If you enable AutoPIN, the system selects the
AutoPIN check box on the Reservation dialog, by
default. If you disable the AutoPIN parameter, the
system does not select the AutoPIN check box, by
default. The possible values are:
● AutoPIN=0
AutoPIN is disabled.
AutoPIN=1*
●
AutoPIN is enabled.
SubConfSize specifies a default size for new sub
conferences. For example,
SubConfSize=5.
By default, SubConfSize=0*.
CabinetRef specifies a default cabinet for new
conferences. For example,
CabinetRef=3
You must base the value of CabinetRef on the
order of new cabinets in the System Administration
section of the CRS Front End.
The possible values for this parameter are as
follows:
● AnyCabinetFlag=0
If AnyCabinetFlag=0, the system disables
the Any Cabinet feature. It is unavailable to
the user on the Make Reservation dialog.
● AnyCabinetFlag=1
If AnyCabinetFlag=1, the system displays
the Any Cabinet option at the top of the
Cabinet list on the Make Reservation dialog.
AnyCabinetFlag=2
●
If AnyCabinetFlag=2, the system displays
the Any Cabinet option at the bottom of the
Cabinet list on the Make Reservation dialog.
7000/
7X0
7000/
7X0
7000/
7X0
7000/
7X0
5 of 5
139
January 2006