Table of Contents
Advertisement
Table 20: Conference Options Settings (continued)
Parameter
Polling
QandA
RollCall
WaitForModerator
CS7000 System Administrator Guide for Release 9.4
Description
If you enable Polling, the system selects the Polling
check box on the Options dialog, by default. If you
disable the Polling parameter, the system does not
select the Polling check box, by default. The possible
values are:
Polling=0*
Polling is disabled.
Polling=1
Polling is enabled.
If you enable QandA, the system selects the QandA
check box on the Options dialog, by default. If you
disable the QandA parameter, the system does not
select the QandA check box, by default. The possible
values are:
QandA=0*
QandA is disabled.
QandA=1
QandA is enabled.
If you enable RollCall, the system selects the
RollCall check box on the Options dialog, by default.
If you disable the RollCall parameter, the system
does not select the RollCall check box, by default. The
possible values are:
RollCall=0*
RollCall is disabled.
RollCall=1
RollCall is enabled.
If you enable WaitForModerator, the system
selects the WaitForModerator check box on the
Options dialog, by default. If you disable the
WaitForModerator parameter, the system does not
select the WaitForModerator check box, by default.
The possible values are:
WaitForModerator=0
●
WaitForModerator is disabled.
WaitForModerator=1*
●
WaitForModerator is enabled.
7000/
7X0
7000/
7X0
7000/
7X0
7000/
7X0
7000/
7X0
2 of 6
143
January 2006
Advertisement
Table of Contents
