Table of Contents
Advertisement
Operator Options
If HHGroups is not blank, two new options are added to the Conference menu. These options
are Connect Preset and Disconnect Preset. These options are also accessible from the
Conference List context menu. To access the context menu, use the right click mouse button.
If an Operator selects a conference and selects the Connect Preset option, the group of circuits
associated with that conference is connected to the conference. A group is associated with a
conference if the group ID is the same as the conference ID.
Figure 117
displays the Connect Preset menu option.
Figure 117: Connect Preset
If an Operator selects a conference and selects the Disconnect Preset option, the group of
circuits in that conference is disconnected. The group of circuits is moved to the conference that
is holding unconnected Hoot and Holler groups. This conference is the conference defined in
HHParkID.
Figure 118
displays the Disconnect Preset menu option.
CS7000 System Administrator Guide for Release 9.4
Configuring Hoot and Holler Groups
January 2006
235
Advertisement
Table of Contents
