Setting, Monitoring, and Operating Sensors from the DeviceNet Configurator
2-7-4
Sensor Operations
1,2,3...
50
5. Change the settings and then click the Download Button in the Edit Device
Parameters Dialog Box.
1. Switch the Configurator to online mode by selecting Network and Con-
nection.
2. Select and double-click the Communication Unit.
3. From the Edit Device Parameters Dialog Box, click the Teaching Button to
the right of the Fiber Amplifier Unit model.
4. Set the following items from in the Sensor Teaching Dialog Box.
• One-point Teaching
• Maximum Sensitivity Adjustment
• Zero Reset
• Two-point Teaching
• Pin-point Teaching
• Flashing
Section 2-7