Advertisement
Quick Links
Digital Fiber-Optic Amplifier
Wire-Saving Amplifiers Offer Remote
Teaching, Easy-to-Repeat Settings
H
Remote Control models have a unique
connector design that allows 16
amplifiers to be connected together
H
Revolutionary remote control
programmer offers "copy and paste"
function for easy settings
H
Detachable connector design enables
users to replace the amplifier without
disturbing wiring and sensing-head
installation
H
Auto power control function enhances stable detection
H
Mark detection model has a blue light source to distinguish tough color combinations
H
Three user-selectable displays: digital incident level, digital percent level and LED bar
graph display
H
Models with dual analog/digital output increase application flexibility
Ordering Information
J AMPLIFIERS
Order connector cables separately for connector-ready models.
Type
Appearance
Remote control
amplifiers, digital
amplifiers, digital
output models
Remote control
amplifiers,
amplifiers,
analog/digital
output models
Amplifiers with
M8 connector
Amplifiers with
cable
Mark-detecting
amplifier
R
Applicable connector
cables (order separately)
E3X-CN master and slave
cables, single ended, 2 m
cables, single ended, 2 m
(6.56 ft) length
XS3F single-ended cables
and XS3W double-ended
cables
Prewired with 2 m
(6.56 ft) cable
Part number
Output
NPN output
ON/OFF output
E3X-DA6
ON/OFF output and
E3X-DA7
analog output
analog output
ON/OFF output
E3X-DA14V
ON/OFF output
E3X-DA11-N
ON/OFF output and
E3X-DA21-N
analog output
ON/OFF output
E3X-DAB11-N
E3X-DA-N
PNP output
E3X-DA8
E3X-DA9
E3X-DA44V
E3X-DA41-N
E3X-DA51-N
---
Advertisement
Related Manuals for Omron E3X-DA-N
Summary of Contents for Omron E3X-DA-N
- Page 1 Digital Fiber-Optic Amplifier E3X-DA-N Wire-Saving Amplifiers Offer Remote Teaching, Easy-to-Repeat Settings Remote Control models have a unique connector design that allows 16 amplifiers to be connected together Revolutionary remote control programmer offers “copy and paste” function for easy settings Detachable connector design enables...
- Page 2 J FIBER-OPTIC CABLES The E3X-DA-N amplifiers use Omron’s E32-series fiber-optic cables. With a choice of over 80 sensing heads, you are sure to find one that matches your application requirements. A selection of E32 cables and their respective sensing distances are at the end of this data...
-
Page 3: Specifications
E3X-DA-N E3X-DA-N Specifications J AMPLIFIER RATINGS/CHARACTERISTICS Description Digital output Analog/digital output Mark-detection M8 connector, digital output Prewired Connector Prewired Connector Prewired Output type NPN output E3X-DA11-N E3X-DA6 E3X-DA21-N E3X-DA7 E3X-DAB11-N E3X-DA14V PNP output E3X-DA41-N E3X-DA8 E3X-DA51-N E3X-DA9 E3X-DA44V Light source (wavelength) - Page 4 E3X-DA-N E3X-DA-N Specifications Table – continued from previous page Digital output Analog/digital output Mark-detection Description M8 connector, digital output Prewired Connector Prewired Connector Prewired Output type NPN output E3X-DA11-N E3X-DA6 E3X-DA21-N E3X-DA7 E3X-DAB11-N E3X-DA14V PNP output E3X-DA41-N E3X-DA8 E3X-DA51-N E3X-DA9...
- Page 5 Selectable among SET, ADJ, and RUN modes. J DISPLAY AND SPECIAL FUNCTION SETTINGS Display Setting The E3X-DA-N offers three display modes, which are Digital Incident Level display, Digital Percent display and Analog display. • Digital Incident Level Display: the incident level is digitally displayed.
-
Page 6: Operation
E3X-DA-N E3X-DA-N Operation J OUTPUT CIRCUITS Out- Model Mode Timing chart State of Output circuit selector output transistor NPN E3X-DA11-N LIGHT Incident received Light ON Operation indicator (orange) Incident not received E3X-DAB11-N Brown Operation indicator E3X-DA6 Display (L/ON) Load (orange) - Page 7 Operate Release (Between blue and black) J TEACHING FUNCTIONS Four teaching methods are available to simplify setup and to allow changes in settings on the fly. The E3X-DA-N offers a new feature, “pinpoint teaching” for positioning Teaching function Application Description Maximum sensitivity setting Use this function for sensing objects without backgrounds or through–...
- Page 8 E3X-DA-N E3X-DA-N J MAXIMUM SENSITIVITY SETTING J ONE-POINT TEACH MODE (TEACHING) (WITHOUT OBJECT) 1. Set the “SET ADJ RUN” switch to “SET” position. Set the mode selector to “SET” to start teaching. The red level display will flash if teaching error occurs. In this case, repeat the entire teaching procedure.
- Page 9 E3X-DA-N E3X-DA-N J TWO-POINT TEACH MODE J PINPOINT TEACH MODE (POSITIONING) WITH/WITHOUT OBJECT 1. Set the “SET ADJ RUN” switch to “SET” position. 1. Set the “SET ADJ RUN” switch to “SET” position. 2. Press the TEACH button for approximately 1 second with no object 2.
- Page 10 J DISPLAY SETTING Level” display. Two color (red and green) bar graph should appear in the display. E3X-DA-N can be programmed to display digital incident level, digital percent level or analog display. Analog incident level and threshold 1. Set the “SET ADJ RUN” switch to “RUN” position. Digital incident level should appear in the display.
- Page 11 E3X-DA-N E3X-DA-N Flashing Function Display Orientation Setting Function 1. Set the “SET ADJ RUN” switch to “SET” position. 1. Set the “SET ADJ RUN” switch to “SET” position. 2. Press the “MODE” button until “LOFF” is displayed. “LOFF is 2. Press the “MODE” button until “d123” is displayed. “d123” is the default setting.
-
Page 12: Engineering Data
E3X-DA-N E3X-DA-N J ZERO RESET FUNCTION J INITIAL RESET When activated, this function sets the incident level digital display This function enables users to cancel program input and reset to zero. This enables operators to easily monitor the difference the amplifier back to the default (factory) setting between the maximum and the minimum incident levels. - Page 13 E3X-DA-N E3X-DA-N J OPERATING RANGE (TYPICAL) With standard sensing object at max. sensitivity. (Use for the positioning of the object and Sensor.) E32-DC200 E32-D33 E32-L25L (Reflective) (Reflective) (Convergent Reflective) Standard High speed Long distance Standard High speed Long distance Distance X (mm)
- Page 14 E3X-DA-N E3X-DA-N J ANALOG OUTPUT VS. DISTANCE (STANDARD MODE) E32-TC200 (Through-beam) E32-DC200 (Diffuse) Distance (mm) Distance (mm) J PARALLEL OPERATING RANGE (TYPICAL) MARK DETECTION SENSOR E3X-DAB11-N At max. sensitivity. (Use for optical axis adjustment at installation.) E32-TC200 (Through-beam) E32-TC200+E39-F1 (Through-beam)
- Page 15 E3X-DA-N E3X-DA-N Dimensions Unit: mm (inch) J AMPLIFIERS WITH MALE CONTACTS FOR E3X-CN CONNECTOR CABLES Incident level display E3X-DA6 Threshold level display E3X-DA7 Operation indicator (orange) E3X-DA8 E3X-DA9 Mounting Holes Two, 13.05 4.9 x 3 = (0.51) 14.7 (0.58) 17.15 (0.67)
- Page 16 E3X-DA-N E3X-DA-N J AMPLIFIERS WITH M8 CONNECTORS Shown with Mounting Bracket attached Use Omron XS3F and XS3W connector cables or comparable Brad Harrison NanoChanget cordsets. 4.9 x 3 = 14.7 (0.58) 28.05 (1.10) The mounting bracket can E3X-DA14V 23.95 (0.94) be attached to this side.
- Page 17 E3X-DA-N E3X-DA-N J CONNECTORS Master Connectors E3X-CN11 E3X-CN21 (0.39) 2000 (6.56 ft) 10.7 6 (0.24) (0.42) (0.10) (0.27) (0.11) 4 (0.16) See Note 14.4 (0.57) 4 (0.16) dia. 10±2 (0.33) (0.39 (0.24) (0.03) 30±2 (1.18±0.08) 15.1 ±0.08) (0.59) (1.97) Note: E3X-CN11: 4-dia., 3-conductor, vinyl-insulated round cable of cross-sectional area 0.2 mm and insulation diameter 1.1 dia.
- Page 18 E3X-DA-N E3X-DA-N J REMOTE CONTROL PROGRAMMER Communications jack AC adapter jack E3X–MC11 Menu indicators Connection indicator 22 (0.87) 52.8 (2.08) Channel indicator Output indicator Mode display Channel buttons (5.35) Teaching button Escape button Enter button Power supply button Mode button...
-
Page 19: Installation
0 V Blue 2. For details about the K3NX, refer to the E3X-DA-N 12 to 24 VDC K3NX Data Sheet in Omron’s Digital Panel Meters catalog or the K3NX Operation Manual (N090). 3. This wiring is for the K3NX with DC power... - Page 20 E3X-DA-N E3X-DA-N J MOUNTING Joining Amplifier Units Mounting 1. Mount the Amplifier Units one at at time onto the DIN rail. 1. Mount the front part of the Amplifier Unit onto mounting bracket E39-L143 (included) or onto DIN rail. 2. Press the back part onto the mounting bracket or onto the DIN rail.
- Page 21 Do not disassemble, repair or modify the E3X-DA-N. Optical Communications • The E3X-DA-N has an enclosure rating of IP50; do not im- Several Amplifier Units can be slid together and used in groups. merse in water. Do not, however, slide the Amplifier Units or attempt to remove •...
- Page 22 E3X-DA-N E3X-DA-N J FIBER UNIT Mounting Fiber Connection and Disconnection The E3X amplifier has a lock button. Connect or disconnect the Tightening Force fibers to or from the E3X amplifier using the following procedures: The tightening force applied to the sensing head should be as 1.
- Page 23 E3X-DA-N E3X-DA-N J FIBER INSERTION Make sure that the fiber is fully inserted in the amplifier. The Use either one of the two holes on the right (refer to the following sensing distance may decrease if the fiber is not fully inserted.
- Page 24 E3X-DA-N E3X-DA-N Correct E39-F32j Protective Spiral Tubes Insert a fiber to the protective spiral tube from the head connector Fiber Unit side (screwed) of the tube. Nylon wireholder Fiber Protective spiral Incorrect tube Metal holder Push the fiber into the protective spiral tube. The tube should be straight so that the fiber is not twisted when inserted.
- Page 25 (Do not attempt to remove Connectors without separating them from other Amplifier Units first.) Press down Lever When using the E3X-DA-N with the Remote Control Remove Programmer, mount the End Plate in the way shown below. Mounting End Plate Depending on how it is mounted, an Amplifier Unit may move during operation.
- Page 26 : Long-distance mode : Standard mode “Standard object” measurements were made with E3X-DA-N set to Standard mode. The size of standard object is the same as the fiber core diameter or the lens diameter for models with a lens. “Minimum sensing object” is shown in parentheses below the standard object. The minimum sensing object size was determined when the E3X-DA-N amplifier received light that exceeded a light incident value of 1000 (set to digital incident level display).
- Page 27 : Long-distance mode : Standard mode “Standard object” measurements were made with E3X-DA-N set to Standard mode. The size of standard object is the same as the fiber core diameter or the lens diameter for models with a lens. “Minimum sensing object” is shown in parentheses below the standard object. The minimum sensing object size was determined when the E3X-DA-N amplifier received light that exceeded a light incident value of 1000 (set to digital incident level display).
- Page 28 : Long-distance mode : Standard mode “Standard object” measurements were made with E3X-DA-N set to Standard mode. The size of standard object is the same as the fiber core diameter or the lens diameter for models with a lens. “Minimum sensing object” is shown in parentheses below the standard object. The minimum sensing object size was determined when the E3X-DA-N amplifier received light that exceeded a light incident value of 1000 (set to digital incident level display).
- Page 29 : Long-distance mode : Standard mode “Standard object” measurements were made with E3X-DA-N set to Standard mode. The size of standard object is the same as the fiber core diameter or the lens diameter for models with a lens. “Minimum sensing object” is shown in parentheses below the standard object. The minimum sensing object size was determined when the E3X-DA-N amplifier received light that exceeded a light incident value of 1000 (set to digital incident level display).
- Page 30 (gold wire) can be sensed with the Diffuse Fiber Unit. The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to “two-point teaching with or without-object teaching.”...
- Page 31 (gold wire) can be sensed with the Diffuse Fiber Unit. The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to “two-point teaching with or without-object teaching.”...
- Page 32 (gold wire) can be sensed with the Diffuse Fiber Unit. The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to “two-point teaching with or without-object teaching.”...
- Page 33 (gold wire) can be sensed with the Diffuse Fiber Unit. The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to “two-point teaching with or without-object teaching.”...
- Page 34 (gold wire) can be sensed with the Diffuse Fiber Unit. The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to “two-point teaching with or without-object teaching.”...
- Page 35 (gold wire) can be sensed with the Retroreflective Fiber Unit. The E3X-DA-N may continue to receive internal reflective light when it is set to the maximum sensitivity setting. In this case, set the amplifier to “two-point teaching with or without-object teaching.”...
- Page 36 E3X-DA-N E3X-DA-N NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive 885 Milner Avenue Schaumburg, IL 60173 Scarborough, Ontario M1B5V8 1-800-55-OMRON 416-286-6465 Cat. No. E313-E3-1 6/00/7.5M...
- Page 37 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron E3X-DA14V E3X-DA21-N E3X-DA44V E3X-DA51-N E3X-DA7 E3X-DA9 E3X-DAB11-N...