Omron E3X-DRT21 Operation Manual page 106

CompoWay/F Message Communications
Error Completion
Response Error name
code
"1001" Command too long
"1002" Command too short The command is too short.
"1101" Area type error
"1103" Start address out-
of-range error
"2203" Operation error
Cause
The command is too long.
The command code is wrong.
The unit number of an unconnected Sensor is
specified in the related information.
• A Sensor communications error has occurred.
• The Sensor response indicated a communica-
tions prohibited error.
• The Sensor did not respond.
• The Mobile Console is connected.
• The WRITE command for the second point/
position of Teach operations was sent before
executing the command for the first one.
Section 4-5
95