N E W
DeviceNet Model
Fiber Amplifier Sensor Communication
Unit Supports Multi-vendor Networks
■
ON/OFF signals and incident light levels can be sent to the host
PLC without any need for programming (using the Remote I/O Com-
munications Slave function).
■
Threshold values and function settings can be read, written, or
taught (using the Message Communications function).
■
Device parameters prepared on a personal computer connected to
the network can be downloaded in a batch operation (using the Con-
figurator).
Configurator
Download a group of parameters for devices
(Sensors, Temperature Controllers, etc.,
supporting DeviceNet) that you have prepared
on your personal computer in a single batch.
PLC
Monitor operating hours.
The operating hours for sensors can be stored
in internal memory and used for planning
maintenance and other applications.
Up to 16 channels can be connected.
PLC
Fiber Amplifier Sensor
Communication Unit
E3X-DRT21-S
Mobile Console
A built-in interface for a Mobile
Console lets you bring setting
and confirmation operations
to your fingertips.
Supports a wide range of sensors.
The Unit supports a variety of digital sensors, including
Fiber Sensors, Laser Sensors, and Proximity Sensors.