Mounting
5-1
Mounting
98
Use DIN Track for mounting the Units.
Fiber Amplifier Unit
Fiber Amplifier Sensor
Communication Unit
DIN Track
Fiber Amplifier Unit
Slave Connector
Note
1. The number of Fiber Amplifier Units that can be connected depends on the
model of Communication Unit that is used.
2. Connect the Communication Unit to the left side of the Fiber Amplifier
Units.
3. The Fiber Amplifier Units all function as slaves (the Fiber Amplifier Units
connected to Slave Connectors). When connecting a Fiber Amplifier Sen-
sor Communication Unit, the Slave Connector used to connect the Fiber
Amplifier Units depends on the model of Fiber Amplifier Sensor Communi-
cation Unit.
MS
NS
SS
Units in ascending order starting from unit 1 on the left side.
Section 5-1
Fiber
Sensors
Connectors