Part Names And Functions - Denon DN-V200 Operating Instructions Manual

ENGLISH
5

PART NAMES AND FUNCTIONS

(1) Front Panel
See page 3.
q
POWER button
• Press once to turn the power on.
• Press again to set to the "OFF" position and
turn the power off.
• Set the power to the standby mode by
pressing the POWER button on the remote
control unit while the power is on.
• Turn the power on from the standby mode by
pressing the POWER button on the remote
control unit.
w
Disc tray
• Load discs here. (See page 12.)
• Press the OPEN/CLOSE button
and close the disc tray.
• The disc tray is also closed when the PLAY
e
button is pressed.
e
PLAY/KEY LOCK button (1)
• Press this button to play the disc (See page
18.)
• Used in combination with the SHIFT button to
turn the KEY LOCK mode on and off.(See page
28.)
r
STILL/PAUSE/IR REMOTE LOCK
button (3)
•
Press this button to pause images or music or
to play images frame by frame. (See page 19.)
• Used in combination with the SHIFT button to
turn the IR REMOTE LOCK mode on and
off.(See page 28.)
t
STOP/HIDE OSD button (2)
• Press this to stop the disc. (See page 19.)
• Used in combination with the SHIFT button to
turn the HIDE OSD mode on and off.(See page
28.)
y
SHIFT button
• Used in combination with other buttons to
perform advanced functions. (See page 28.)
10
u
SKIP/REPEAT button (8)
• Press this to move back to the beginning of
the current track (or chapter).
• Press again to move back to the beginning of
the previous track (or chapter). (See page 19.)
• Used in combination with the SHIFT button to
switch the repeat mode.(See page 20.)
i
SKIP/P.SCAN button (9)
Press this to move ahead to the beginning of
•
the next track (or chapter). (See page 19.)
Used in combination with the SHIFT button to
•
switch between progressive scan and
interlaced scan.
!5
to open o
KEY LOCK indicator
Lights when the KEY LOCK mode is on.
•
!0
IR REMOTE LOCK indicator
Lights when the IR REMOTE LOCK mode is
•
on.
!1
HIDE OSD indicator
Lights when the HIDE OSD mode is on.
•
!2
Display
• Information on the disc that is currently playing
is shown on the display. (See page 10.)
!3
STANDBY indicator
• This lights when the power is in the standby
mode.
!4
Remote control sensor
!5
OPEN/CLOSE button
(5 OPEN/CLOSE)
• Press this button to open and close the disc
tray.(See page 12.)
!6
Power indicator
• This indicator lights when the power is on.
(2) Rear Panel
!7
Component video output connectors
(COMPONENT VIDEO OUT)
• Connect using the included video cords.
!8
SERIAL REMOTE terminal
(DN-V300 only)
• This is the terminal for serial control from an
external device.
!9
21-pin SCART terminal (AV1)
• Connect using a 21-pin SCART cable (available
in stores).
@0
Digital audio output connector
(OPTICAL)
• Connect using an optical fiber cable (available
in stores).
• Digital data is output from this connector.
(3) Display
Lights to indicate the currently playing disc.
These light to indicate the names of the sections of the disc
being played.
Lights in the
programmed play
mode.
Displays the title, track number and
elapsed time during playback.
Lights in the still/pause mode.
Lights during playback, flashes when the resume play memory function is activated.
@1
S-Video output connector
(S-VIDEO OUT)
• Connect using an S-Video connection cord
(available in stores).
@2
Audio output connectors
(AUDIO OUT)
• Connect using the included audio cord.
@3
Power input (AC IN)
• Connect to AC power supply using the included
power supply cord.
@4
Video output connector (VIDEO OUT)
• Connect using the included video cord.
@5
Digital audio output connector
(COAXIAL)
• Connect using an digital audio cord. Connect a
commercially available 75 Ω/ohms pin-plug cord.
• Digital data is output from this connector.
Lights in the random play mode.
Lights when progressive video
signals are being output.
Lights in the
repeat play
mode.