Part Names And Functions - Denon DVM-1800 Operating Instructions Manual

0

5 PART NAMES AND FUNCTIONS

POWER button
Press once to turn the power on.
l
Press again to set to the "OFF" position and turn the power
l
off.
Set the power to the standby mode by pressing the POWER
l
button on the remote control unit while the power is on.
Turn the power on from the standby mode by pressing the
l
POWER button on the remote control unit.
Power indicator
This indicator lights when the power is on and when the
l
power is In the standby mode.
RANDOM button
Press this button to begin random play.
l
Pressing this button during stop, and press play button play
l
to full automatic random play.
This button does not work when playing DVDs.
l
REPEATbutton
Press this button for repeated playback. (Refer to page 32 for
l
details.)
DISC SKIP button
Each time this button is pressed, the carousel will rotate in a
l
clockwise direction to the next tray position. This allows for
loading or unloading of discs.
This button is also used to select the next disc, in the normal
l
play continuously.
Remote control sensor (REMOTE SENSOR)
Display
Information on the disc that IS currently playrng IS shown on
l
the display. (See page 16.)
SKIP button (I441
Press thus to move back to the begrnning of the current track
l
(or chapter).
Press again to move back to the begrnnrng of the previous
l
track (or chapter).
PLAY button (F)
Press this to play the disc.
l
SKIP button (ml)
Press this to move ahead to the beginning of the next track
l
(or chapter).
STILL/PAUSE button
Press this button to stop play temporarily.
l
SLOW/SEARCH button
Press this button in the play mode to search in the reverse
l
direction.
Press the button in the still mode for slow play in the reverse
l
direction.
STOP button (HI
Press thus to stop the disc. (See page 23.)
l
SLOW/SEARCH button
Press the button In the play mode to search in the forward
l
direction.
Press the button in the stall mode for slow play in the forward
l
directron.
OPEN/CLOSE button
Press this button to open and close the disc tray.
l
3
(II)
(44)
(h, 1
(4
Disc number button (I-5)
@
Press these button to specify which disc you want to play.
l
@ Disc tray (I-5)
Load discs here.
Press the OPEN/CLOSE button @to open and close the disc
tray.
The disc tray is also closed when the PLAY button @ is
pressed.
Video output connector
Connect using the included video cord.
l
S-Video output connector
Connect using an S-Video connection
l
stores).
Component video output
Connect using video cords (available in stores).
l
Subwoofer connector
Connect using an audio cord (available to stores) to the active
l
subwoofer.
ANALOG OUT connectors
Connect these to the input connectors of an amplifier, etc.,
l
to hear the sound of the DVM-1800
through the amplifier.
Digital audio output connector
Connect using an audio cord. Connect
l
available 75 Q/ohms pin-plug cord.
Digital data is output from this connector.
l
Digital audio output connector
Connect using an optical fiber cable (available in stores).
l
Digital data output from this connector.
IS
l
Remote control input connector
(REMOTE CONTROL IN)
This is the Input connector for wired remote control.
l
Consult your DENON
connector.
Remote control output
(REMOTE CONTROL OUT)
This is the output connector for wired remote control.
l
Consult your DENON
connector.
Power cord
Plug this into a wall power outlet.
l
(VIDEO OUT)
(S-VIDEO OUT)
cord (available
connectors (COMPONENT)
over the speakers
(COAXIAL)
a commercially
(OPTICAL)
dealer if you wish to use this
connector
dealer if you wish to use this
in
15