Denon DN-V200 Operating Instructions Manual page 15

w When "96k LPCM OUT" is selected:
Press the ENTER button several times and select the
conversion mode.
96k (Factory default)
When playing linear PCM DVDs that are not copyright-
protected, for 2-channel PCM audio signals up to 96 kHz,
linear PCM signals are output as such without being
converted from the digital outputs.
PCM signals of 48 kHz/16 bits and lower are output,
regardless of whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the
digital signals are down-mixed for output into two
channels, front left and right. (Only the front left and right
channels are output for sources for which down-mixing is
prohibited.)
When playing copyright-protected linear PCM DVDs, in
consideration of copyrights, no digital signals are output
for sources exceeding 48 kHz/16 bits. When playing such
sources, either set to "96k>48k" or make analog
connections. (See page 9.)
96k>48k
Linear PCM and packed PCM signals are converted to
44.1 kHz or 48 kHz and output. (The PCM digital audio
output signals are converted to 48 kHz or less in
3
consideration of copyrights.) When making digital
connections to an AV amplifier that is not compatible with
96 kHz/88.2 kHz signals, set to "96k>48k".
When playing DVDs recorded in linear PCM or packed
PCM and the unit is set to output digital and analog audio
signals simultaneously, the analog audio output signals
are also converted to 48 kHz or below, so we recommend
setting to "96k" and also making analog connections.
e When "DOWNMIX" is selected:
Press the ENTER button several times and select the
output format.
LT/RT (Factory default)
Set this when connecting the unit to a Dolby Pro Logic
decoder.
STEREO
Set this when connecting the unit to a stereo device.
r When "COMPRESSION" is selected:
OFF (Factory default)
Select this for the standard range.
LEVEL
Select this to achieve powerful sound even when the
volume is low. This setting is suited for watching DVDs
late at night with the volume low. (This setting is only
valid for DVDs recorded in Dolby Digital.)
To exit the setup mode
Press the RETURN or SETUP button.
When "DISC SETUP" is selected
ENTER
Remote control unit Remote control unit
1
AUDIO SETUP
DIGITAL OUT PCM
96K LPCM OUT 96K
DOWNMIX LT/RT
COMPRESSION OFF
SET ENT E R BUTTON
SELECT
SET 96K LPCM TO 48K OUT
2
AUDIO SETUP
DIGITAL OUT PCM
96K LPCM OUT
96K
DOWNMIX LT/RT
OFF
COMPRESSION
SELECT SET ENT E R BUTTON
SET DOWNMIX MODE
AUDIO SETUP
DIGITAL OUT PCM
96K LPCM OUT 96K
DOWNMIX LT/RT
OFF
COMPRESSION
SELECT SET ENT E R BUTTON
3
DYNAMIC RANGE COMPRESSION
TOP MENU
/PBC
2,3
ENTER
ANGLE
DISPLAY STOP STILL /PAUSE
SLOW/SEARCH
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
See page 12.
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
DIALOG
Use this to set the language of the sound output from the
speakers.
SUBTITLE
Use this to set the language of the subtitles displayed on the
TV.
DISC MENUS
Use this to set the language of the menus recorded on the
disc (top menu, etc.).
ANGLE MARK
Angle marks are displayed/not displayed on the screen.
CAPTIONS
Use this to set whether or not to display the closed captions
recorded on DVDs.
NOTE:
Angle marks and captions are displayed when "SET UP
MENU MODE" at "SYSTEM SETUP" is set to "EXPERT" .
q When "DIALOG" is selected:
Press the ENTER button several times and select the
language.
ENGLISH (Factory default)
Select this when you want to play the DVD with the
sound in English.
FRENCH
Select this when you want to play the DVD with the
sound in French.
SPANISH
Select this when you want to play the DVD with the
sound in Spanish.
GERMAN
Select this when you want to play the DVD with the
sound in German.
ITALIAN
Select this when you want to play the DVD with the
sound in Italian.
OTHERS
Use the number buttons to input the language number.
(See "Language code list" on page 16.)
ENGLISH ENGLISH
MENU
RETURN
PLAY
SKIP
ENTER
Remote control unit Remote control unit
DISC SETUP
ENGLISH
DIALOG
SUBTITLE
OFF
DISC MENUS
ENGLISH
ON
ANGLE MARK
CAPTIONS OFF
SELECT SET ENTE R BUTTON
SET DISC LANGUAGE ( DIALOG )
ENTER
Remote control unit Remote control unit
DISC SETUP
DIALOG ENGLISH
SUBTITLE OFF
DISC MENUS ENGLISH
ANGLE MARK ON
CAPTIONS OFF
SELECT SET ENTE R BUTTON
SET DISC LANGUAGE ( DIALOG )
15