Part Names And Functions - Denon DVD-3910 Operating Instructions Manual

ENGLISH
(11) DVI connections
Connection with equipment that has a DVI (Digital Visual Interface)-D connector permits the transfer of digital
images.
When using display equipment that is not supported by the HDCP (content protection function), the image
will not be output properly. (See the compatibility table.)
Make an audio connection also because an audio signal will not be output from the DVI-D connector.
Commercially-available DVI cables are available in 24-pin and 29-pin types. The DVD-3910 supports the 24-pin
DVI-D cable, but the 29-pin DVI cable cannot be connected.
DVD-3910
24P DVI-D cable
(commercially available)
NOTE:
HDMI and DVI connectors.
• The table below indicates the compatibility of connections between the HDMI/DVI-D output connector of the
DVD-3910 and monitors that support HDMI/DVI-D.
Monitor with
Monitor with
DVI-D (HDCP
HDMI
compatible)
™ ™
HDMI output
(Only Video)*2
terminal
Video/Audio*1
™ ™
DVI-D output
terminal (Only Video) (Only Video)
Copyright Protection System
To play the digital images and sounds of DVD video or DVD audio via an HDMI/DVI-D connection, it
is necessary that both the player and monitor (or AV amplifier) support a copyright protection
system called HDCP (High-bandwidth Digital Content Protection System). HDCP is copy protection
technology that comprises data encryption and authentication of the partner equipment. The DVD-
3910 supports HDCP. Please see the user's manual of your monitor (or AV amplifier) for information
about this.
12
AV-1
Monitor equipped with
DVI input connectors
DVI-D Input
connector
*1 Among the monitors that support HDMI, some
Monitor with
DVI-D (HDCP
do not support audio output (for example,
incompatible)
projectors). In connections with equipment such
as this, audio signals are not output from the
x
HDMI output connector. Use analog audio
outputs, DENON LINK, or IEEE 1394 connectors
x
to provide the audio output at "DIGITAL
INTERFACE SETUP" unde "SETUP", set "HDMI
AUDIO SETUP" to "2CH".
*2 When the set's HDMI connector is connected to
a DVI-D compatible monitor (HDCP compatible)
with an HDMI-DVI converter cable (commercially
available), the signals are output in digital RGB,
regardless of the "HDMI/DVI SELECT" setting.
5

PART NAMES AND FUNCTIONS

(1) Front Panel
See page 3.
q
Power ON/STANDBY button
• Press once to set to the standby mode. The
indicator lights up in red.
• Press again to turn the power on. The
indicator lights up in green.
w
Power indicator
• This indicator lights when the power is on and
when the power is in the standby mode.
Light green:Power is on
Light red :Power is in the standby mode
e
Power switch
• Press once to turn the power on.
• Press again to set to the "OFF" position and
turn the power off.
r
DENON LINK indicator
• This indicator lights when the audio signals are
transferred by DENON LINK connections.
t
AL24 PLUS indicator
• This indicator lights when the audio signals of
a DVD, etc., are being processed digitally with
the AL24 processing Plus.
y
Display
• Information on the disc that is currently playing
is shown on the display. (See page 13.)
u
Remote control sensor
i
SELECT of HDMI/DVI button
• Press this to set the video signal output from
the HDMI connector or the DVI connector.
(See page 28.)
HDMI Y Cb Cr HDMI RGB DVI
HDMI/DVI OFF
o
FORMAT of HDMI/DVI button
• Press this to set the video signal format from
the HDMI connector or the DVI connector.
(See page 28.)
480P/576P 720P 1080i
!0
VIDEO MODE button
• Use this to instantly change the adjustment
mode of the stored video signals.
The unit will return to the stored setting
values when the power is switched off.
(The setting values of this mode will not be
stored.)
• PICTURE MODE
STD M1 M2 M3 M4 M5
• PROGRESSIVE MODE
AUTO1 AUTO2 VIDEO1 VIDEO2 VIDEO3
• TV TYPE
MULTI NTSC PAL
• SQUEEZE MODE
No effective for interlaced image.
(See page 21.)
OFF ON
!1
Select the playback area/layer of
SUPER AUDIO CD
(SUPER AUDIO CD SETUP)
• Switch the area /layer of the Super audio CDS
played with priory.
• MULTI.......When playing Super audio CDs, the
Multi channel area is played with
priory
• STEREO ....When playing Super audio CDs,
the stereo channel area is played
with priority.
• CD.............When playing Super audio CDs,
the CDs layer area is played with
priority.
MULTI STEREO CD
!2
PURE DIRECT SELECT button
• Press to switch the modes with the specific
video signals and digital audio signals and
indicate in display on and off. (See page 26.)
NORMAL MODE 1 MODE 2 ALL OFF
!3
DVD/AUDIO/VIDEO logo
• This indicator lights when playing the DVD
audio or DVD video.
!4
Super Audio CD logo
• This indicator lights when playing the Super
audio CD.
!5
Disc tray
• Load discs here. (See pages 15, 30.)
!6
• Press the OPEN/CLOSE button to open
and close the disc tray.
• The disc tray is also closed when the PLAY
!8
button is pressed.
!6
OPEN/CLOSE button ( )
5
• Press this to open and close the disc tray.
(See pages 15, 30.)
!7
STILL/PAUSE button ( )
3
• Press this to pause images or music or to play
images frame by frame. (See page 31.)
!8
PLAY button ( )
1
• Press this to play the disc. (See page 30.)
!9
STOP button ( )
2
• Press this to stop the disc. (See page 31.)
@0
Skip button ( )
8
• Press this to move back to the beginning of
the current track (or chapter).
• Press again to move back to the beginning to
the previous track (or chapter). (See page 31.)