Loading Paper; Loading Paper In Tray 1 - Ricoh Aficio CL7000 Operating Instructions Manual

Loading Paper

Load paper and change the paper size
in tray 1, tray 2, and the optional pa-
per feed unit by following the proce-
dures below.
Important
❒ Tray 1 uses only A4 K paper ex-
clusively. Load A4 paper at all
times.
❒ The 2000-sheet large capacity tray
uses only A4 K paper exclusively.
Load A4 paper at all times.
❒ If you want to load letter size pa-
per (11 × 8 K) in tray 1 and the
1
/
2
optional 2000-sheet large capacity
tray, contact your sales or service
representative.
Reference
p.45 "Paper Sizes" for details
about paper to be loaded in the pa-
per tray and optional Paper Feed
Unit Type 7100.

Loading Paper in Tray 1

Important
❒ Tray 1 uses only A4 K paper ex-
clusively. Load A4 paper at all
times.
❒ If you want to load letter size pa-
per (11 × 8 K) in tray 1, contact
1
/
2
your sales or service representa-
tive.
A A A A
Slowly pull out the paper tray,
until it stops.
B B B B
Load paper into the tray with the
print side down.
Important
❒ Check that the top of the stack is
not higher than the limit mark
inside the tray.
C C C C
Carefully slide the paper tray into
the printer, until it stops.
Loading Paper
3
ZDJH003J
ZDJY001J
57