Loading Paper In The Bypass Tray - Ricoh Aficio CL7000 Operating Instructions Manual

Paper and Other Media
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Paper Input", and then
press the { { { { # Enter} } } } key.
Menu:
Paper Input
The paper selection menu appears.
C C C C
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Paper Type", and then
3
press the { { { { # Enter} } } } key.
Paper Input:
Paper Type
The paper tray selection menu ap-
pears.
D D D D
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play the target paper tray, and
then press the { { { { # Enter} } } } key.
Paper Type:
Tray 2
The paper type selection menu ap-
pears.
E E E E
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play the loaded paper type, and
then press the { { { { # Enter} } } } key.
Tray 2
Recycled Paper
After about two seconds, the dis-
play returns to the menu.
F F F F
Press the { { { { On Line} } } } key.
"Ready" appears on the display.
Ready
62
Loading Paper in the Bypass
Tray
Besides plain paper, you can use the
bypass tray to load thick paper, enve-
lopes, OHP transparencies, paper
longer than A3L, and paper that can-
not be loaded in the paper trays or pa-
per feed unit.
• Set the size and direction of the
loaded paper on the control panel
or with the printer driver. Make
sure the settings do not conflict.
Otherwise, the paper may jam or
the print quality may be affected.
Note
❒ The bypass tray can accommodate
sheets 90-305 mm(3.5-12.01") wide
and 148-457 mm(5.8-18") long.
However, the paper size must be
set using the control panel. When
TM
using the RPCS
sheets of up to 1260 mm(49.61") in
length can be set.
❒ If you load custom size paper or
special paper, select the paper size
using the control panel. The RPC-
TM
S printer driver can select the
paper size using the printer driver
properties. The paper size selected
using the printer driver overrides
that selected using the control pan-
el. See p.64 "Specifying custom
size paper for the Bypass Tray".
❒ If you load thick paper, OHP trans-
parencies, or envelopes, make the
settings for thick paper or OHP
transparencies using the control
panel or printer driver. See p.65
"Specifying a paper type for the
Bypass Tray".
printer driver,