Ricoh Aficio CL7000 Operating Instructions Manual page 89

Problem
Prints have smudges on the
back.
Printing is entirely patchy.
Printing is partly patchy.
Prints have white lines on them. Clean the dustproof glass.
Prints have black lines on them. Clean the dustproof glass.
Possible causes and solutions
Automatic selection of paper size and feed direction may
have been canceled, a specific paper size selected, and then
paper with a different size and feed direction loaded. Enable
automatic selection on the control panel. Alternatively, load
paper with the same size and feed direction as the settings on
the control panel.
See p.60 "If you load a paper size that is not selected auto-
matically".
The paper size and feed direction settings on the control pan-
el may not match the size and feed direction of the paper in
the bypass tray. Make the settings that match the size and
feed direction of the paper in the bypass tray.
See p.62 "Loading Paper in the Bypass Tray".
If the print area exceeds the paper size - for instance, when
producing A4 prints on B5 paper — subsequent prints may
have smudges on the back.
If "Add Toner XXX" (where "XXX" is a color) appears on the
display, replace the appropriate color toner cartridge.
See p.4 "Replacing the Toner Cartridge".
Try reducing the print density.
• To adjust the print density, press the { { { { Menu} } } } key on the
control panel, and then select [Image Density] from the
Maintenance menu.
• See p.42 "Adjusting Image Density".
• If [Toner saving] is selected on the RPCS
[Print Quality] tab, printing becomes faint.
For details, see the printer driver Help.
Try reducing the print density. To adjust the print density,
press the { { { { Menu} } } } key on the control panel, and then select [Im-
age Density] from the Maintenance menu.
See p.42 "Adjusting Image Density".
If "Add Toner XXX" (where "XXX" is a color) appears on the
display, replace the appropriate color toner cartridge.
See p.4 "Replacing the Toner Cartridge".
Make sure the toner cartridges and photoconductor unit are
installed correctly.
See p.4 "Replacing the Toner Cartridge".
See p.11 "Replacing the Photoconductor Unit".
Non-recommended paper is loaded. Use paper recommend-
ed by the supplier.
Make sure the machine is level.
See p.29 "Cleaning the DustProof Glass".
See p.29 "Cleaning the DustProof Glass".
Other Printing Problems
TM
printer driver's
4
83