Resetting The Gradation Correction Values To The Initial Values - Ricoh Aficio CL7000 Operating Instructions Manual

C C (cyan)/Y (yellow) correction values
Use to adjust the color printed when cyan and yellow toner are used. For
C/Y (cyan/yellow), the correction values are determined based on a com-
bination of these two colors, although settings are made separately for
each color.
D K, M, C/Y
The numerical values set at time of gradation correction sheet printing are
shown. These correspond to the numerical values set using the control
panel.
Resetting the gradation
correction values to the initial
values
Reset the correction value default.
A A A A
Press the { { { { Menu} } } } key.
"Menu" appears on the display.
B B B B
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Maintenance", and then
press the { { { { # Enter} } } } key.
Menu:
Maintenance
C C C C
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Color Calibrate", and then
press the { { { { # Enter} } } } key.
Maintenance:
Color Calibrate
D D D D
Press the { { { { U U U U } } } } or { { { { T T T T } } } } key to dis-
play "Reset", and then press the
{ { { { # Enter} } } } key.
Color Calibrate:
Reset
A confirmation message appears.
Press # to reset
calibration
E E E E
Press the { { { { # Enter} } } } key.
A message indicating the grada-
tion correction values have re-
turned to their defaults appears.
ACE082S
Calibration was
reset
After about 2 seconds, the display
returns to the "Color Calibrate: Re-
set" menu.
F F F F
Press the { { { { Online} } } } key.
"Ready" appears on the panel dis-
play.
Ready
Correcting the Color Gradation
2
41