Ricoh Aficio CL7000 Operating Instructions Manual page 15

❒ After removing the seals, be
careful not to let oil from oil-
supplying parts, or the seals
come into contact with your
body or clothes.
J J J J
As shown, hold the fuser oil unit
using one hand, hold the green
handle with the other, and then
slowly insert the unit horizontal-
ly, in the direction of the arrow.
Important
❒ Be careful not to get oil on the
top metal part of the fuser oil
unit.
❒ Insert the fuser oil unit firmly,
until it stops.
K K K K
Slowly turn the fuser oil unit han-
dle in the direction of the arrow,
until it clicks.
L L L L
Close the upper left cover (A A A A ),
and then push the part labeled
"PUSH" next to the handle at the
bottom rear, until it clicks (B B B B ).
1
M M M M
If you removed the external tray
D D D D
in step
Insert the hooks of the external
tray into the printer slits, and then
lower it toward you.
ZHXH060J
N N N N
If the duplex unit is installed,
close the duplex reversal unit.
Reference
p.3 "Opening and Closing the
Duplex Reversal Unit"
O O O O
If the 2 tray finisher or the book-
let finisher is installed, reattach it
to the printer.
ZHXH070J
Reference
See p.2 "Detaching the SR770 (2
Tray Finisher)" or p.2 "Detach-
ing the SR910(Booklet Finish-
er)"
Replacing the Fuser Oil Unit
2
, reattach it to the printer.
1
ZHXH082J
ZDJH010J
9