Displaying The Measured Values - Konica Minolta CA-310 Instruction Manual

<For Analyzer Mode>
If analyzer measurement mode is selected, measurement results will be displayed as shown below.
● Digital display section
• Display contents : R, B, G
• Display range
● Analog display section
• Display contents : When analyzer mode (G-standard) is selected
* For details on the analog display function and how to set the range for each dot, refer to page 67.
● When the analog display range is set to n%
-n×8% or
lower
<Out of Measurement Range>
[For xylv, T∆ ∆ ∆ ∆ ∆ uvLv, u'v'Lv or XYZ,Analyzer Mode]
● When the measurement range is exceeded
[For T∆ ∆ ∆ ∆ ∆ uvLv Mode]
● T or ∆uv are out of
the display range
[For Flicker Mode]
● When the measured value has
exceeded 999.9%
● When Lv(luminance) is the following
under 0.1cd/m 2 for LED Flicker Measuring ø27 Probe
(CA-P32/35)
under 0.3cd/m 2 for LED Flicker Measuring ø10 Probe
(CA-PS32/35)
Outputs of the currently
those of the specified target color (W)
: The range to be displayed:
When the effective number of
digits is 3 digits to 99900(%)
When the effective number of
digits is 4 digits to 99990(%)
An effective number that has
been set in the selection of number of digits to be displayed (P.42) will be displayed.
However only to two digits to the right of the decimal
R/G, B/G: Ratio of measured values
∆G: Difference from the target color in the case of
monochrome light G
When analyzer mode (R-standard) is selected
∆R: Difference from the target color in the case of mono-
chrome light R
G/R, B/R: Ratio of measured values
Red Green
Below ±n%
Below ±n×2%
Below ±n×4%
Below ±n×8%
measured monochrome lights R, B and G in ratio (%) to
R
B
G
Red
+n×8% or
higher
Digital display : "– – – – –"
Analog display : Not lit
LCD display: "OVER"
Digital display : "– – – – –"
(T and ∆uv)
Digital display : "– – – – –"
Analog display : Not lit
LCD display: "FLICKER ERROR OVER"
Digital display : "– – – – –"
Analog display : Not lit
LCD display: "FLICKER ERROR UNDER"
78
R/G
B/G
will be displayed.
R/G
B/G
∆G
∆R
R/G
B/R B/G
∆G
G/R
∆G