Communications Section - Konica Minolta CA-310 Instruction Manual

Communications Section

This section explains communication with PC via RS-232C or
USB.
Communicating with PC via RS-232C
Explains how to connect the RS-232C cable and select the RS-232C baud rate to enable two-way
communication with PC via RS-232C.
Communicating with PC via USB
Explains how to connect the USB cable to enable communication with PC via USB.
Remote Measurement
Explains how to perform measurement from the PC remotely.
* In case that the connector is connected and unconnected frequently during
a measurement, please try to communicate with PC via RS-232C instead of
USB.
If any error still occurs, please contact a Konica Minolta-authorized service
facility.
85
Page 86
Page 88
Page 88