Konica Minolta CA-310 Instruction Manual page 23

<Out of Measurement Range>
[For xylv, T∆ ∆ ∆ ∆ ∆ uvLv, u'v'Lv or XYZ,Analyzer Mode]
● When the measurement range is exceeded
[For T∆ ∆ ∆ ∆ ∆ uvLv Mode]
● T or ∆uv are out of
the display range
[For Flicker Mode**]
● When the measured value has
exceeded 999.9%
● When Lv(luminance) is the following
under 0.1cd/m for LED Flicker Measuring ø27 Probe
2
(CA-P32/35)
under 0.3cd/m for LED Flicker Measuring ø10 Probe
2
(CA-PS32/35)
**Flicker Mode is a function which can be used only when LED Flicker Measuring ø27 Probe(CA-P32/35) or LED Flicker Measuring ø10
Probe(CA-PS32/35) is connected.
Digital display
Analog display
LCD display
Digital display
(T and ∆uv)
Digital display
Analog display
LCD display
Digital display
Analog display
LCD display
21
: "– – – – –"
: Not lit
: "OVER"
: "– – – – –"
: "– – – – –"
: Not lit
: "FLICKER ERROR OVER"
: "– – – – –"
: Not lit
: "FLICKER ERROR UNDER"