Displaying The Program Level - Siemens SINUMERIK 840Di sl Operating Manual

4
01/2008
X
9th Axis
...
+
...

4.2.2 Displaying the program level

Current
block
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
4.2
Milling machine:
Select the axis to be traversed and
then press the "-" or "+" key.
Traverse the axes to the point of interruption.
Function
If subprograms are called while a part program is running, the block
numbers for the main program and subprograms together with their
pass number (P) can be displayed.
Sequence of operations
"AUTO" mode is selected in the "Machine" operating area.
When you press the "Program level" softkey, the window headed
"Program level" appears instead of the "Current block" window. The
softkey labeling changes to "Current block".
During execution of a part program, the block numbers for the main
program and subprograms, together with their pass number (P), are
displayed in the "Program level" window. The main level is always
visible, a nesting depth of up to 12 can be displayed.
When you press the "Current block" softkey, the "Current block"
window containing the program blocks of the current part program is
displayed again.
Machine operating area
General functions and displays
4
4-95