Siemens SINUMERIK 840Di sl Operating Manual page 219

5
01/2008
Batch execution
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
The screen shows the information relating to the batch execution as a
whole and with respect to the individual tools. The user may halt,
continue or cancel batch processing and monitor the results during
and after batch processing.
Each tool is represented by a separate line in the list. The status of the
tool is represented by the configured symbol in the 2nd column.
The following states are displayed by default:
•
"Waiting to be machined": Gray field,
• "Current tool in batch processing": yellow/blue arrow,
• "Completed without errors": Green field with check mark,
• "Completed with error(s)": Red field with "X",
The status of the tool on which the cursor is placed is displayed in the
form of a text, for example, any errors, load destination.
The state of the current tool in batch processing is displayed in the
message line.
If the user does not move the cursor for a few seconds, the cursor is
automatically placed on the current tool for batch processing when the
next processing step has been completed.
Parameters operating area
5.3 Tool management
X
5
5-219