Siemens SINUMERIK 840Di sl Operating Manual page 418

8
Diagnostics operating area
8.5 Calling theversion screen
Cycle
version
User
User
cycles
Manufacturer
Standard
Cycles
Definitions
Defini-
tions
Sort
Save
versions
8-418
Press the desired vertical softkey
• "User cycles" or
• "Manufacturer cycles" or
Manufact.
cycles
Standard
• "Standard cycles"
cycles
The "Cycle version" horizontal softkey remains active.
All files of the type .com and .spf from the user, manufacturer or
standard cycle directory are displayed in the "Version data" overview
without the package lists.
The definition files available on the NCK can be displayed in a
separate "Version data definitions" overview by pressing the
"Definitions" horizontal softkey. All the definition files from the
DEF.DIR directory in the data management then appear in this
overview.
You can change to another version display by pressing a different
horizontal softkey.
The version information can be sorted according to the proposed
criteria in either ascending or descending order.
The sorted and unsorted version displays of the displayed definitions
are saved as follows:
Range
Definitions
Target
Services→Diagnostics\Log files
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8
01/2008
File
DEF.COM
© Siemens AG 2008 All rights reserved.