Siemens SINUMERIK 840Di sl Operating Manual page 406

8
Diagnostics operating area
8.4 Service displays
"Send connection"
softkey
Signals
8-406
Function
The "SI communication (send)" dialog box contains a list of the
configuration in tabular form and the status of F_SENDDP.
The following signals of the selected connection (in this case, e.g.
NCU710) are displayed in this dialog box:
• CPU-CPU communication ID
• Logical base address
• Connection number
• Parameterized maximum permissible communication time
• Actual communication time
• Maximum communication time
• Error reaction
Error reactions that can be set:
[0] "Alarm 27350 + STOP D/E"
[1] "Alarm 27350"
[2] "Alarm 27351 (self-clearing)"
[3] "No response from the system"
• Errors
• Diagnostics error code
• Replacement values active
• Actual communication data
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8
01/2008
© Siemens AG 2008 All rights reserved.