Sorting And Saving Version Data - Siemens SINUMERIK 840Di sl Operating Manual

8
01/2008
Service
displays
Version
NCU
version
HMI
version
Cycle
version
Defini-
tions
Hardware
version
Option: Compile cycles

8.5.1 Sorting and saving version data

Sort
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Sequence of operations
Press the "Service displays" softkey.
The horizontal softkey bar changes.
Open the "Version" window with the following softkeys:
"NCU version" for the version data of the NCU and
"HMI version" for the version data of the HMI.
"Cycle version" Version data for each of the cycle packages
"Definitions" The version data for definitions
"Hardware version" for the version data of the hardware.
(only available for SINUMERIK solution line)
If "Compile cycles" is available on the NCK, the version is displayed.
Use the "Page" keys to scroll up and down.
Function
There are various sorting functions for the following version lists:
•
NCU version
• HMI version
• Cycle version
• Definitions
In the left-hand part of the pane for sorting, you can select a sort
criterion from the column designations in the list by pressing the
Select key. In the right-hand pane you can choose from descending
and ascending sorting sequence for the selected sort criterion.
Diagnostics operating area
8.5 Calling theversion screen
8
8-415