Activating Timing - Siemens SINUMERIK 840Di sl Operating Manual

6
"Program" operating area
6.5 Multi-channel step sequence programming (option)

6.5.2 Activating timing

Timing
Edit
workpiece
6-276
Function
Timing for steps is based on the monitoring of times per step and per
channel in relation to the program end or reset states of all involved
programs (end of step per channel and creation of TimeData_* entries
in the relevant file).
Preparation phase - Message:
Timing initializing. Please wait....
Initiation of execution – Message:
Timing is active.
After completion - Message:
Recorded data is processed. Please wait....
Timing is activated in the Machine operating area under "Program
control". The steps are initialized for all channels stored in the relevant
DAT environment.
The multi-channel program display is opened when you press the
"Edit workpiece" softkey once the above listed preparations have been
completed.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
6
01/2008
© Siemens AG 2008 All rights reserved.