Creating A Program; Program For Parameters - Mitsubishi FX2N-16CCL-M User Manual

FX2N-16CCL-M CC-Link System Master Block
10.2

Creating a Program

10.2.1

Program for parameters

In the program below, data link automatically starts when the PLC starts to run.
[Caution]
The auxiliary relays in the non-keep area must be used as auxiliary relays (M) for parameter
setting programs.
For the details, refer to 9.1.
[Setting and operation using the buffer memory]
M8000
RUN monitor
M20
Module
error
M0
M1
M1
M35
Module
ready
Communication between Master Station and Remote I/O Stations 10
FROM K0 HA K4M20
PLS
SET
MOV K3
MOV K7
MOV K2
TO K0 H0001 D0
MOV K0
TO K0 H0006 D3
MOV H0101
MOV H0102
MOV H0103
TO K0 H0020 D12
RST
→M35 to M20
K1 BFM#A
H
M0
M1
Number of connected modules
D0
(3 modules)
Number of retries (7 times)
D1
D2
Number of automatic return modules
(2 modules)
K3
Operation specification against CPU
D3
down (stop)
K1
Remote I/O station (AJ65BTB1-16D)
D12
Remote I/O station (AJ65BTB1-16T)
D13
Remote I/O station (AJ65BTB1-16DT)
D14
Station information
K3
M1
10-3