Mitsubishi FX2N-16CCL-M User Manual page 69

FX2N-16CCL-M CC-Link System Master Block
[Remote input]
3) The input status of the remote I/O stations is automatically (for each link scan) stored in the
buffer memory "remote input (RX)" in the master station.
4) The PLC receives the input status stored in the buffer memory "remote input (RX)" using
the FROM instruction.
PLC
FROM
[Remote output]
5) The PLC writes the ON/OFF information output from the remote I/O station to the buffer
memory "remote output (RY)" using the TO instruction.
6) The output status stored in the buffer memory "remote output (RY)" is automatically (for
each link scan) output from the remote I/O stations.
PLC
Master station
Remote input (RX)
RX0F ~ RX00
RX1F ~ RX10
RX2F ~ RX20
RX3F ~ RX30
RX4F ~ RX40
RX1DF ~ RX1D0
Master station
Remote output (RY)
RY0F ~ RY00
RY1F ~ RY10
RY2F ~ RY20
RY3F ~ RY30
RY4F ~ RY40
RY5F ~ RY50
TO
RY6F ~ RY60
RY7F ~ RY70
RY8F ~ RY80
RY1DF ~ RY1D0
Remote I/O station
(Station No. 1: Occupies 1 station)
X0F ~ X00
16-point module
Remote I/O station
(Station No. 3: Occupies 1 station)
Y0F ~ Y00
16-point module
Functions 5
Remote I/O station
(Station No. 2: Occupies 1 station)
X0F ~ X00
X1F ~ X10
32-point module
Remote I/O station
(Station No. 4: Occupies 1 station)
Y0F ~ Y00
Y1F ~ Y10
32-point module
5-3