Mobility Domain Scenario - 3Com 3CRWX120695A, 3CRWX440095A Configuration Manual

WX1200> display sessions network verbose
User
Name
------------------------------ ----
SHUTTLE2\exmpl
Client MAC: 00:06:25:13:08:33
State: ACTIVE
now on: WX 10.3.8.103, AP/radio
from: WX 10.3.8.103, AP/radio
from: WX 10.3.8.103, AP/radio
1 sessions total
Mobility Domain
Scenario
Sess IP or MAC
ID Address
----------------- --------------- -----
6* 10.3.8.55
GID: SESS-4-000404-98441-c807c14b
(prev AUTHORIZED)
3/1, AP 00:0b:0e:ff:00:3a, as of 00:00:24 ago
6/1, AP 00:0b:0e:00:05:d7, as of 00:01:07 ago
3/1, AP 00:0b:0e:ff:00:3a, as of 00:01:53 ago
(For more information about this command and the fields in the output,
see the Wireless LAN Switch and Controller Command
The following scenario illustrates how to create a Mobility Domain named
sunflower consisting of three members from a seed WX switch at
192.168.253.21:
1 Make the current WX switch the Mobility Domain seed. Type the
following command:
WX1200# set mobility-domain mode seed domain-name sunflower
success: change accepted.
2 On the seed, add the members of the Mobility Domain. Type the
following commands:
WX1200# set mobility-domain member 192.168.253.11
success: change accepted.
WX1200# set mobility-domain member 192.168.111.112
success: change accepted.
3 For each member WX switch, configure the IP address used to reach the
seed WX switch. Type the following commands:
WX1200# set mobility-domain member seed-ip 192.168.253.21
4 Display the Mobility Domain status. Type the following command:
WX1200# display mobility-domain status
Mobility Domain name:
Member
---------------
192.168.111.112
192.168.253.11
192.168.253.21

Mobility Domain Scenario

VLAN
Name
default
sunflower
State
-------------
STATE_UP
STATE_UP
STATE_UP
Port/
Radio
3/1
Reference.)
Status
--------------
MEMBER
MEMBER
SEED
115