Table of Contents
Advertisement
62
C
3: C
HAPTER
ONFIGURING AND
WX1200# display vlan config
VLAN Name
---- ---------------- ------ ----- ----- ---------------- ----- -----
1 default
4094 web-aaa
M
P
ANAGING
ORTS AND
To configure a port group named server2 containing ports 2 and 5 and
add the ports to the default VLAN, type the following commands:
WX1200# set port-group name server2 2,5 mode on
success: change accepted.
WX1200# set vlan default port server2
success: change accepted.
To verify the configuration change, type the following command:
Admin
VLAN
Tunl
Status State Affin Port
Up
Up
Up
Up
The web-aaa VLAN is used by the WebAAA feature and is automatically
configured by MSS.
To indicate that the ports are configured as a port group, the display
vlan config output lists the port group name instead of the individual
port numbers.
Removing a Port Group
To remove a port group, use the following command:
clear port-group name name
Displaying Port Group Information
To display port group information, use the following command:
display port-group [all | name group-name]
To display the configuration and status of port group server2, type the
following command:
WX1200# display port-group name server2
Port group: server2 is up
Ports:
2, 5
VLAN
S
5
server2
0
2
Port
Tag
State
none
Up
4094 Up
Advertisement
Table of Contents
