3Com 3CRWX120695A, 3CRWX440095A Configuration Manual page 245

Displaying ACL Maps to Ports, VLANs, and Virtual Ports
Two commands display the port, VLAN, virtual port, and Distributed MAP
mapping of a specific security ACL. For example, to show the ports,
VLANs, virtual ports, and Distributed MAPs mapped to acl-999, type one
of the following commands:
WX1200# display security acl map acl-999
ACL acl-999 is mapped to:
Port 6 In
Port 6 Out
WX1200# display security acl
ACL table
ACL
-------------------------------- ---- ------ -------
acl-orange
acl-999
acl-blue
acl-violet
Clearing a Security ACL Map
To clear the mapping between a security ACL and one or more ports,
VLANs, virtual ports, or Distributed MAPS, first display the mapping with
display security acl map and then use clear security acl map to
remove it. This command removes the mapping, but not the ACL.
For example, to clear the security ACL acljoe from a port, type the
following commands:
WX1200# display security acl map acljoe
ACL acljoe is mapped to:
Port 4 In
WX1200# clear security acl map acljoe port 4 in
success: change accepted.
After you clear the mapping between port 4 and ACL acljoe, the
following is displayed when you enter display security acl map:
WX1200# display security acl map acljoe
ACL acljoe is mapped to:
Clearing a security ACL mapping does not stop the current filtering
function if the ACL has other mappings. If the security ACL is mapped to
another port, a VLAN, a virtual port, or a Distributed MAP, you must
enter a clear security acl map command to clear each map.
Mapping Security ACLs
Type Class Mapping
IP Static
IP Static Port 6 In
Port 6 Out
IP Static Port 1 In
IP Static VLAN 1 Out
245