3Com 3CRWX120695A, 3CRWX440095A Configuration Manual page 404

Wireless lan switch and controller
Table of Contents

Advertisement

404
C
A: T
HAPTER
ROUBLESHOOTING A
WX S
WITCH
Table 36 WX Setup Problems and Remedies
Symptom
3Com Wireless
Switch Manager or a
web browser (if you
are using Web View)
warns that the WX
switch's certificate
date is invalid.
WX switch does not
accept configuration
information for a
MAP access point or
a radio.
Diagnosis
The switch's time and date
are currently incorrect, or
were incorrect when you
generated the self-signed
certificate or certificate
request.
The country code might not
be set or might be set for
another country.
Remedy
1 Use set timezone to set
the time zone in which
you are operating the
switch. (See "Setting the
Time Zone" on page 93.)
2 Use set timedate to
configure the current time
and date in that time
zone. (See "Statically
Configuring the System
Time and Date" on
page 95.)
3 Reconfigure the
administrative
certificate(s). (See
Chapter 12, "Managing
Keys and Certificates," on
page 255.)
4 If you have already
configured a certificate on
the switch for
authentication by
network users, you must
recreate this certificate,
too.
1 Type the display system
command to display the
country code configured
on the switch.
2 If the value in the System
Countrycode field is
NONE
or is for a country
other than the one in
which you are operating
the switch, use the set
system countrycode
command to configure
the correct country code.
(See "Specifying the
Country of Operation" on
page 136.)

Advertisement

Table of Contents
loading

Table of Contents