Silent-Time - Planet WGSW-28040 Command Manual

Password Retry : 5
Silent Time : 0 (seconds)
SSH ==================================
SSH Server : disabled
Session Timeout : 10 (minutes)
History Count : 128
Password Retry : 6
Silent Time : 0 (seconds)

4.4.25 silent-time

Command:
silent-time <0-65535>
Parameter:
<0-65535>
Default:
Default silent time is 0.
Mode:
line Configuration
Usage Guide:
Use "silent time" command to specify the silent time for CLI running on console, telnet or ssh service. When user
input password to login and authenticate failed, the fail retry number will increase one. After fail retry number exceed
configured one, the CLI will block login for the period of silent time which configured by the command "silent-time".
Example:
This example shows how to change console silent time to 10, telnet silent time to 15 and ssh silent time to 20.
Switch(config)# line console
Switch(config-line)# silent-time 10
Switch(config-line)# exit
Switch(config)# line telnet
Switch(config-line)# silent-time 15
Switch(config-line)# exit
Switch(config)# line ssh
Specify silent time with unit seconds. 0 means do not silent.
Command Guide of WGSW-28040
87