4.27.2 save
Command:
save
Mode:
Privileged EXEC
Usage Guide:
Use "save" command to save running configuration to startup configuration file. This command is equal to "copy
running-config startup-config".
Example:
This example shows how to save running configuration to startup configuration.
Switch# save
Success
4.27.3 copy
Command:
copy (flash:// | tftp://) (flash:// | tftp://)
copy tftp:// (backup-config | running-config | startup-config)
copy (backup-config | running-config | startup-config) tftp://
copy (backup-config | startup-config) running-config
copy (backup-config | running-config) startup-config
copy (running-config | startup-config) backup-config
Parameter:
flash://
Specify the file stored in flash to operation. Available files are:
flash://startup-config
Command Guide of WGSW-28040
318