System File; Boot System - Planet WGSW-28040 Command Manual

4.27 System File

4.27.1 boot system

Command:
boot system (image0 | image1)
Parameter:
image0
image1
Default:
Default boot image is image0.
Mode:
Global Configuration
Usage Guide:
Dual image allow user to have a backup image in the flash partition. Use "boot system" command to select the active
firmware image. And another firmware image will become a backup one.
Example:
This example shows how to select image1 as active image.
Switch(config)# boot system image1
Select "image1" Success
This example shows how to show active image partition.
Switch# show flash
File Name File Size Modified
------------------------ ---------------- ------------------------
startup-config 1191 2000-01-01 00:00:23
rsa1 974 2000-01-01 00:00:18
rsa2 1675 2000-01-01 00:00:18
dsa2 668 2000-01-01 00:00:18
ssl_cert 993 2000-01-01 00:00:18
image0 (backup) 4372401 2012-09-24 01:57:29
image1 (active) 5555970 2012-06-12 12:17:46
Boot from flash image partition 0
Boot from flash image partition 1
Command Guide of WGSW-28040
317